Solid super therm insulator

Description

DESCRIPTION:-
SOLID SUPER THERM IS A WATER BORNE COMBINATION OF HIGH PERFORMANCE ACRYLIC RESIN AND ADDITIVES WHICH PRODUCES A TOUGH, YET FLEXIBLE COATING FILM. DESIGNED FOR PERFORMANCE AND DURABILITY. SOLID SUPER THERM CONTAINS DIFFERENT ITEMS OF CERAMIC TO BLOCK UP TO 95% OF SOLAR HEAT ENTERING STRUCTURE DUE TO VISUAL LIGHT ; U.V.AND I.R.SOLID SUPER THERM IS A FLEXIBLE MEMBRANE WITJ LOW PERMEABILITY THAT CAN GREATLY REDUCE EXPANSION AND CONTRACTION OF A ROOF. IT ALSO PREVENTS CORROSION AND AURFACE DETERIORATION.
TYPICAL USES:-
AS A TWO COAT INSULATION SYSTEM ON EXTERIOR S TO BLOCK THE MIGRATION OF SOLAR HEAT AGAIN (ROOF AND SIDE WALL).
AS AN INSULATOR SYSTEM FOR INTERIOR APPLICATION.
AS INSULATION FOR TRANSPORTATION VEHICLE, REFRIGERATED CONTAINERS, REEFER TRUCKS AND RAILROAD CARSWHEN APPLIED TO EXTERIOR .
AS A SYSTEM OVER METAL, CONCRETE. MASONARY AND WOOD TO STOP MOISTURE PENETRATION AND CORROSION.
ABILITY TO RESIST MILD AND DMILDEW AND POLLUTION TO INCREASE LONGEVITY AND REDUCE SURFACE MAINTENANCE.
AS TOPCOAT OVER METAL ROOF OR AN INTERMEDIATE COAT ON FLAT ROOF.
APPLICATION METHODS:-
SURFACE MUST BE CLEAN FROM OIL, TAR, RUST, GREASE, SALT AND FILMS
USE GENERAL DEGREASER IF NEEDED CLEAN SURFACE USE WITH CLEANER TO RELEASE DIRT AND DEGREASER RESIDUE PRESSURE WASH IF POSSIBLE

SURFACE MUST BE COMPLETELY DRY BEFORE APPLYING
MAXIMUM SURFACE TEMPERATURE WHEN APPLYING 35C°
SOLID PRIM THERM INSULATOR SHOULD BE MECHANICALLY MIXED OR MIXED BY HAND FOR THREE MINUTES THEN APPLIED.
CAN APPLY BY ROLLER OR SPRAY GUN AFTER DILUTE BY WATER.
SOLID SUPER THERM CAN BE APPLIED TO METAL, CONCRETE, AND MASONARY AND WOOD.
THIS COATING SHOULD NEVER BE APPLIED AT LESS THAN WET (425 MICRON WET FILM THICKNESS) , 9.1 MILS DRY (229 MICRON)
FOR EACH APPLICATION.
TETS AND CERTIFICATIONS
EXTERIOR INSULATION AGAINST SOLAR RADITION- BENEFIT COMPARABLE TO R19
GUARDED HOT BOX ASTM C236
BLOCKS 99.5 I.R./ UP TO 68% SOUND BLOCKAGE

PHYSICAL DATA
SOLID BY WEIGHT 60±2%
SOLID BY VOLUME 72±2
DENSITY 1.2±0.01gm/l
D.T. AT 25C° 20-30 min
OVER COAT 2 hr at 25 c°
FULL CURE 7 DAYS
COLOR DARK SILVER OR WHITE
SHELF LIFE UP TO 24 MONTHES IF UNOPENED UNDER APPPROPRIATE STORAGE
VISCOSITY 108 KU
MAXIMUM SURFACE TEMP.WHEN APPLYING 35C°

0
Connecting
Please wait...
Send a message

Leave your message.

Your name
* Email
* Describe your issue
Login now

Need more help? Save time by starting your support request online.

Your name
* Email
* Describe your issue
We're online!
Feedback

Help us help you better! Feel free to leave us any additional feedback.

How do you rate our support?