Description
Solid 707 Putty is a ready-mixed, white, water-based acrylic filling putty for concrete and gypsum surfaces. It offers strong filling power, easy application and a high spreading rate for interior and exterior finishing.
Features and uses
- Acrylic polymer binder.
- Suitable for concrete and gypsum surfaces.
- Applied with a putty knife, in one or more coats as required by the surface.
- Ready to use without thinning.
Technical properties
- Theoretical spreading rate: 2 to 3 m²/kg.
- Solids by weight: 71% ± 2%.
- Solids by volume: 50% ± 2%.
- Specific gravity: 1.72 ± 0.02 g/cm³.
- Dry film thickness: 150 to 200 microns.
- Wet film thickness: 250 to 300 microns.
- Shelf life: 12 months in the original sealed container, away from direct sunlight and heat.
Surface preparation
Remove dust, grease and oils before application. Sand contaminated surfaces as needed. Refer to the data sheet for full application, drying, storage and safety instructions.
Technical Data Sheet: Download TDS (PDF, English)
Arabic Technical Data Sheet: Download Arabic PDF




