Description
Product description
Type
This product is superior quality emulsion paint, designed for interior surfaces. Based on 100% pure acrylic emulsion giving an eggshell finish.
Features and benefits
Specially designed product to offer resistance against 22 different varieties of bacteria and fungus. Offers good flow, hiding power, in can anti bacterial and color retention properties. Has very good opacity, outstanding washability and leveling, thereby creating a high-class finish. Provides smooth durable and washable silk finish.
Free from harmful chemicals like APEO, formaldehyde, heavy Metals etc. Has very low VOC which ensures good indoor air quality. Equipped with advance HCT formula which can withstand hairline cracks up to 1mm.
Recommended use
Strongly recommended for interiors of Hospitals, Hotels, Schools, Wash rooms, Kitchens, living rooms etc.
Substrate
Cement plaster, concrete, block work, rendered surfaces etc.
Substrate should have sufficient strength to receive the paint. Any defects in the substrate like surface undulations, cracks, pin holes etc., should be rectified/filled before starting painting. The compatibility of any third party filling material, if used, shall be confirmed with Jotun before application.
Product data
Colour white or any colour according to mci colour card
Specific gravity 1.26 Theoretical Only for white colour
Solids by volume 37 ± 2 volume%
VOC 24 g/l
Application data
The product can be applied by
Roller : Recommended.
Spray : Use airless spray or conventional spray.
Brush : Recommended to paint corners and edges.
Guiding data for airless spray
Nozzle tip 0.021–0.027″
Spray angle degrees 65–80°
Pressure at nozzle 140 – 190
Cleaning of painting tools
Water
Film thickness per coat
Typical recommended range
Dry film thickness 40 – 60 μm
Wet film thickness 108 – 162 μm
Film thickness will vary and is calculated as average.
Theoretical spreading rate 9.25 – 6.2 m²/l
Thinner
Water
Dilution
Maximum 10 %
Conditions during application
The temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air, measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper drying
Drying times at 23 c°
Surface dry 6 h
Hard dry 8 hr
Dry to overcoat 6 hr
Surface preparation
The substrate must be sound, clean, dry and free from dust, oil, grease, laitance etc. All traces of form release agents/curing agents must be removed. A light sanding with suitable abrasive material is recommended before application. Any resulting dust/loose particles must be removed.
Primer
Emulsion primer such solid 3000
Solid hygiene 2 coats
Health and safety
Please observe the environmental and precautionary notices displayed on the container.
A Material Safety Data Sheet for the product has been issued.
Detailed information regarding health and safety risks and precautions for the use of this product is specified in the product’s Safety Data Sheet.
